You are certain that you did not do anything with your iPhone screen, but due to some reasons, apps are accidentally launching or the screen is moving on itself. It seems impossible, but the fact, it actually happens. If this problem happens to you after installing an iOS 13 update on your iPhone, you are encountering the ghost touch bug in this iOS version. Read on to this post to find solutions to fix the Ghost Touch issue and get your iPhone back to work normally.

What is a ghost touch bug?

Ghost touch or ghost touching bug is one of the emerging problems that was initially occurred on iPhone 6/6 Plus, following an iOS update installation. Surprisingly, this problem appeared again in iOS 13 beta versions with some iPhone users.

Ghost touch is when your device performs actions by itself without any touch. For example, apps on your iPhone automatically open or close while you do not do anything.

Among the reasons for ghost touch problem on an iPhone, it could be a faulty display or damaged components to the screen. If some pins caused your iPhone display not to work correctly, then this is the case. Apart from the faulty hardware, ghost touch issue can be caused by software bugs. If you have visited this page while searching for solutions to fix the iOS 13 problem on your iPhone, this post is for you. Follow this post to know how to deal with ghost touch bug on iPhone running iOS 13.

How to Troubleshoot iPhone with Ghost Touch bug in iOS 13

Before proceeding, you should remove any screen protector from your iPhone. You are recommended if the screen protector is not certificated by Apple. Make sure that your phone screen does not have dust and grime so that they cannot affect screen functions. If this does not help you fix the ghost touch bug on your iPhone, you should try the following solutions.

Solution 1: Restart your iPhone to fix ghost touch bug

There is a chance that your iPhone might act up after an iOS change. It often occurs when the update caused issues to your iPhone system, here are the display features. The simplest solutions to fix mirror glitches, performing a restart can address the Ghost Touch problem. This will refresh your apps as well as system functions and get rid of minor errors including conflicts in iOS 13 update. A restart varies, depending on the iPhone model you are using.

If you are using an earlier iPhone model with a Home button, you can perform a restart by following these steps:

  1. Press and hold the Power button for a few seconds until you see the Power off 
  2. Drag the slider to power off your iPhone completely.
  3. After 1 minute, press the Power button again until the Apple logo shows up on the screen.

In newer iPhone models without the Home button, you can do a restart by this way:

  1. Press and hold the Power button along with one of Volume buttons until you see the Power Off 
  2. Drag the slider to turn off your iPhone
  3. After a few seconds, press firmly the Power button again until the Apple logo appears.

A restart will not affect your iPhone data, so it does not result in data loss on your iPhone.

Solution 2: Install pending updates on your iPhone

If the ghost touch bug just happens to a certain app, it could be the problem from that app. There is a chance the app goes rogue after a system update. If third-party apps are the main cause, installing all pending app updates might help. The updates include bug fixes for errors and glitches, caused by the firmware update. If your iPhone is connected to a stable Wi-Fi connection, you can manually check for and install pending app updates on your iPhone to fix ghost bug issues:

  1. Open App Store app from the Home screen
  2. Scroll down to the bottom and then tap on Updates. There will be a list of pending updates.
  3. Scroll through the list of apps and tap onUpdate button next to each app to install the individual update.
  4. If there are multiple app updates, tap on the Update All button to update them at once.

Wait for the process to complete and then restart your iPhone to apply the recent changes.

Solution 3: Reset all settings on your iPhone

Common problems that could not be fixed by the previous procedures are usually solved by performing a settings reset. All your customized settings in iOS 13 that trigger the ghost touch problem on your iPhone will be erased. Creating a backup is not necessary since the process doesn’t affect any data stored on your iPhone. Should you want to give a try, then follow these steps below:

  1. OpenSettings from your Home screen.
  2. Tap onGeneral > Reset.
  3. SelectReset all settings from the available option.
  4. Enter the passcode of your iPhone when asked to continue.
  5. Tap on the popup again to confirm a settings reset.

After the reset, all customized settings will be restored to the original values. You will need then to re-enable features, disabled by default if you want to use them again on your iPhone.

Solution 4: Factory reset your iPhone to fix ghost touch bug in iOS 13

If the ghost touch bug still persists on your iPhone, then you can consider performing a system reset. A factory reset can troubleshoot the issue further. This will format your iPhone storage, including saved data, and other files. Thus, make sure to back up all important data beforehand. You can back up your data to iCloud or iTunes as your preferences. After creating a backup, proceed these steps to perform a factory reset from the Settings app:

  1. OpenSettings from the Home screen.
  2. Tap onGeneralReset.
  3. ChooseErase all content and settings option
  4. Enter your passcode when prompted to continue
  5. Tap on the popup to confirm a factory reset.

You can also use iTunes to erase your iPhone and manually restore its default settings. If you opt for this method, you can back up data from your iPhone straight to iTunes drive or a specific folder on your computer. Once you complete backing all your personal information, you can then erase your iPhone using iTunes. Connect your iPhone to the computer and follow the onscreen instructions to finish resetting your phone in iTunes. when the reset is done, set up your iPhone as new or restore from an iOS backup.

Solution 5: Restore your iPhone in recovery mode

Booting your iPhone into recovery mode and restoring it through iTunes can help you repair corrupted system files in the iOS 13 update, including the ones that caused the ghost touch bug. Fixing major issues on your iPhone through recovery mode has a higher success rate. However, there is a downside of this method is that the internal memory will be affected. Thus, you should create a backup through iTunes before proceeding. Should you want to give this method a shot, refer to the following procedures.

If you’re using an iPhone 8/8 Plus and later models, do the following steps to boot into recovery mode:

  1. Plug your iPhone into the computer and open
  2. Once it is connected, quickly press and release the Volume Up button.
  3. Quickly press and release the Volume Down button.
  4. Press the Power button and keep holding it when you see the Apple logo.
  5. Release the Power button when the Recovery Mode screen shows up on the screen.

If you are using 7/7 Plus, simply follow these steps below to boot into recovery mode:

  1. Plug your iPhone into the computer and launch iTunes.
  2. Press and hold the Power +Volume Down buttonat once.
  3. Keep holding them even when you see the Apple logo.
  4. Release both the buttons when the Recovery mode (Connect to iTunes)screen appears.

If you are using older iPhones like the iPhone 6s/6s Plus, you can enter recovery mode by following these steps:

  1. Connect your iPhone to the computer and open
  2. Press and hold Home + Power buttons
  3. Keep holding them even when the Apple logo appears and then release them when you see the Connect to iTunes
  4. Click on Restore inTunes.
  5. Follow the rest of the onscreen prompts to start restoring your iPhone in iTunes.

Wait for the process to complete. Once done, you can exit recovery mode and unplug your phone from the computer. Remember not to disconnect your iPhone if the restore process is not completed to avoid iOS corruption. To exit recovery mode, you just force restart your iPhone.

Solution 6: Put your iPhone into DFU mode to repair your iPhone.

The last method to fix the ghost touch bug problem after trying all prior methods is to use a DFU mode restore. It’s the deepest kind of system restore on an iOS device. In this mode, iTunes can still sync your iPhone system without the bootloader. Complex errors related to the corrupted iOS system can be fixed by this method. If you want to troubleshoot deeper, follow the procedures to boot your phone into DFU mode and then restore it in iTunes.

To enter DFU mode on older iPhone models, follow these steps below:

  1. Connect your iPhone to the computer with the help of a Lightning cable.
  2. Once your phone is connected, press and hold the Home button + Power button for about 10
  3. After that, release the Power button while still holding the Home button until your iPhone screen goes black. Your iPhone has successfully booted into DFU mode.

In iTunes, you will be prompted with a message, saying that it has detected your iPhone using recovery mode. Follow the onscreen instruction to restore your iPhone.

If you are using iPhone 7 and 7 Plus, follow these steps to enter DFU mode:

  1. Connect your iPhone to the computer using a Lightning cable.
  2. Press firmly both Power and Volume Down buttons for 7-10 seconds.
  3. After that, release the Side button while still holding the Volume Down button until the screen goes black.

Your iPhone has successfully booted into the DFU mode. All you need is to follow instructions in iTunes to start restoring the iOS system

To enter DFU Mode on an iPhone 8, 8 Plus, X and later model, do the following steps:

  1. Connect your iPhone to your computer and launch iTunes.
  2. Once it’s connected, press and quickly go of the Volume Up button, and then do the same with the Volume Down button.
  3. Hold the Power button for a few seconds until your iPhone screen turns black.
  4. Hold both the buttons for about 5 seconds.
  5. After that, release the Power button, but still holding down the Volume Down button until there is nothing on your iPhone screen.

Once your phone enters DFU mode, iTunes will prompt you a message saying that your iPhone has been detected in recovery mode. You can now start repairing your iOS device. When the process is done, just exit DFU mode and complete the setup wizard like the first time you unbox it. To exit DFU mode, perform a forced restart on your iPhone.


Above are potential solutions to fix the ghost touch bug on iPhones running iOS 13 version. If Ghost Touch is one of your troubles in this iOS version, you can try the mentioned methods above to solve this annoying issue. If you have any question, drop it in the comment below.